Supply voltage:
Flow rate, Qmax:
Pump head, Hmax:
Liquid temperature:
System pressure, Pmax:
Power Range:
Ambient temperature:
EEI:
Enclosure class:
Insulation class:1 x 230 V – 50/60 Hz
10.8 m³/h
10 m
+2°C to +110°C (TF 110)
1.0 MPa/10 bar
5-47 W
0°C to +40°C
≤ 0.23
IP 44
F

» Ready for Conversion according to Ecodesign Requirements for 2015(ErP) with EEI ≤ 0.23
» Providing energy savings and comfort level
» Automatic and continuous detection of optimal duty point by ECO
» High safety – built-in electrical and thermal protection of the pump
» Fault prompt function
» Low noise level
» Based on 500,000 times test in extreme conditions » Suitable for light commercial application

Constant pressure mode

• The pump maintains constant pressure regardless of the flow
• The preferred operation mode for under floor heating and 2 string systems with low flow variation

Proportional pressure mode

• If the proportional pressure mode is selected, the differential pressure varies proportionally with the flow, i.e. higher flow means higher differential pressure
• Proportional pressure is the preferred choice for one-string systems with high flow variation

ECO mode

• The factory setting, ECO, analyzes the heating system and automatically adjusts the pump setting to meet the heating requirement. The result is optimum comfort and a minimum of energy consumption.
• ECO can be used in 80% of the heating system.

Air-vent mode

Press the setting button  for 6 seconds under this mode to vent air in the pump.