Project Description

HES Domestic Circulator Pump

Plastmax HES series pumps are high-efficiency circulators, designed for heating systems. The pump features AUTO function which automatically adjusts the pump to system demands for optimal comfort and the lowest energy consumption as well as simple commissioning.

iPWM is available for HES25/8, 25/10, 25/12 and HES32/8, 32/10, 32/12.

Suitable for:

  • Commercial heating
  • Commercial hot water recirculation
  • Domestic hot water recirculation
  • Domestic heating
  • Industrial heating
Supply voltage:
Flow rate, Qmax:
Pump head, Hmax:
Liquid temperature:
System pressure, Pmax:
Power Range:
Ambient temperature:
EEI:
Enclosure class:
Insulation class:
1 x 230 V – 50/60 Hz
3.7 m3/h
7 m
+2°C to +110°C (TF 110)
1.0 MPa/10 bar
5-47 W
0°C to +40°C
≤ 0.20
IP 44
F

» Ready for Conversion according to Ecodesign Requirements for 2015(ErP) with EEI ≤ 0.23
» Providing energy savings and comfort level
» Automatic and continuous detection of optimal duty point by AUTO
» Automatic night setback function
» High safety – built-in electrical and thermal protection of the pump
» Self-venting pump housing
» Fault prompt function
» Low noise level
» Based on 500,000 times test in extreme conditions

Get A Quote Now

Key Features

Constant speed mode

Three constant speed modes for constant flow applications

Constant pressure mode

• The pump maintains constant pressure regardless of the flow
• The preferred operation mode for under floor heating and 2 string systems with low flow variation
• Constant pressure curves (low and high)

Proportional pressure mode

• If the proportional pressure mode is selected, the differential pressure varies proportionally with the flow, i.e. higher flow means higher differential pressure
• Proportional pressure is the preferred choice for one-string systems with high flow variation
• Proportional pressure curve (high and low)

Autoadapt mode

• The factory setting, AUTO, analyzes the heating system and automatically adjusts the pump setting to meet the heating requirement. The result is optimum comfort and a minimum of energy consumption.
• AUTO can be used in 80% of the heating system

Night mode

The night mode reduces the power consumption to a minimum with power-saving features.

Technical Data

Type Max. volume flow
Qmax
Max. delivery head
Hmax
Energy efficiency
index (EEI)
Thread Threaded pipe
union
Rated
pressure
Overall
length
Mains
connection
Gross
weight
HES15/4 1.8 m³/h 4 m ≤ 0.23 G 1″ G 3/4″ 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HES25/4 2.6 m³/h 4 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HES32/4 3 m³/h 4 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
2.4 kg
HES15/5 2.3 m³/h 5 m ≤ 0.23 G 1″ G 3/4″ 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HES25/5 3.1 m³/h 5 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HES32/5 3.4 m³/h 5 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
2.4 kg
HES15/6 2.4 m³/h 6 m ≤ 0.23 G 1″ G 3/4″ 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HES25/6 3.6 m³/h 6 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HES32/6 3.6 m³/h 6 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
2.4 kg
HES15/7 2.7 m³/h 7 m ≤ 0.23 G 1″ G 3/4″ 10 bar 130 mm 1~230 V,
50/60 Hz
2.1 kg
HES25/7 3.7 m³/h 7 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
2.3 kg
HES32/7 3.7 m³/h 7 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
2.4 kg
HES25/8 6.8 m³/h 8 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
3.3 kg
HES32/8 7.3 m³/h 8 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
3.5 kg
HES25/10 6.8 m³/h 10 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
3.3 kg
HES32/10 7.3 m³/h 10 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
3.5 kg
HES25/12 6.8 m³/h 12 m ≤ 0.23 G 1 1/2″ G 1″ 10 bar 130/180 mm 1~230 V,
50/60 Hz
3.3 kg
HES32/12 7.3 m³/h 12 m ≤ 0.23 G 2″ G 1 1/4″ 10 bar 180 mm 1~230 V,
50/60 Hz
3.5 kg
Get A Quote Now

Measurement

                                                           

Type L1
(mm)
L2
(mm)
B1
(mm)
B2
(mm)
H1
(mm)
H2
(mm)
G
(inch)
Material of rear housing
HES15/4, 5, 6, 7 130 80 155 105 129 101 1″ cast iron/brass/stainless steel
HES25/4, 5, 6, 7 130/180 80 155 105 129 101 1 1/2″ cast iron/brass
HES32/4, 5, 6, 7 180 80 155 105 129 101 2″ cast iron

                                                           

Type Material of rear housing
HES25/8,10,12 cast iron
HES32/8,10,12 cast iron/brass

Performance Curve

Get A Quote Now